Internet Info 1994 March

home *** CD-ROM | disk | FTP | other *** search

/ Internet Info 1994 March / Internet Info CD-ROM (Walnut Creek) (March 1994).iso / inet / protocols / mstd-1782-tests.doc < prev next >

Wrap

Text File | 1991-07-10 | 53.4 KB | 1,327 lines

[ PROTOCOLS:MSTD-1782-TEST.DOC ] [ 4/88 ] DCEC PROTOCOL LABORATORY TELNET PROTOCOL (TELNET) MIL-STD-1782 CERTIFICATION TESTS INDEX This Certification Tests Index provides information on the derivation, organization, and function of tests specified for TELNET within the DCEC Protocol Laboratory. This document is divided into five sections: TELNET TRACEABILITY INDEX; USER TELNET TESTS INDEX; SERVER TELNET TESTS INDEX;, TELNET TEST SCENARIOS INDEX; and TELNET SCENARIOS AND TESTS DESCRIPTIONS. TELNET TRACEABILITY INDEX: TELNET TEST NUMBERS versus TELNET MIL-STD-1782 References... The table shows, for MIL-STD-1782, the TELNET Test Numbers which may be regarded as the "principal tests" of each required function, operation, option, mode, response, or state. ---------- NOTE... Although the Test Numbers in the USER scenarios replicate the Test Numbers in the SERVER scenarios a common Test Number does not indicate equivalent, complementary, or corresponding tests; --------- USER TELNET TESTS INDEX: TELNET TEST NUMBERS versus USER TELNET Commands/Primitives/Options/Modes... The table shows the TELNET Test Numbers which may be regarded as the "principal tests" of each USER TELNET Command or Primitive and/or Option or Mode. ---------- SERVER TELNET TESTS INDEX: TELNET TEST NUMBERS versus SERVER TELNET Response Codes... The table shows the TELNET Test Numbers which may be regarded as the "principal tests" of each SERVER TELNET Response (or State, etc.) to the indicated TELNET Commands or Primitives. TELNET TEST SCENARIOS INDEX: TELNET TEST SCENARIO FILES versus TELNET TEST NUMBERS... The table shows, for each TELNET Test Number, the UNIX filenames of the TELNET test Scenario Files in which it may be regarded as a "principal test objective,. --------- TELNET SCENARIOS AND TESTS DESCRIPTIONS... This section provides a brief narrative of the scope and objectives of each TELNET test Scenario File and a narrative or graphic operational description of each TELNET Test Number. TELNET TRACEABILITY INDEX TELNET TEST NUMBERS versus TELNET MIL-STD-1782 References The following table shows, for MIL-STD-1782, the TELNET Test Numbers which may be regarded as the "principal tests" of each required function, operation, option, mode, response, or state. Test Numbers not indicated here may be used to establish necessary predecessor conditions for these tests. Although the Test Numbers in the USER scenarios replicate the Test Numbers in the SERVER scenarios a common Test Number does not indicate equivalent, complementary, or corresponding tests. Reference User Test Number --------- ---------------- 4.2.2 1, 2, 3, 4, 5, 6 4.2.3 1, 2, 3, 4, 5, 6 4.2.4 18, 20 4.3 0, 14 4.3.1.2 0 4.3.2 19 4.4.1 17 4.4.2 11 4.4.3 8 4.4.4 9 4.4.5 10 4.5 7 4.6.1.1 15, 16 4.6.1.3.2 13 4.7.1.b 12 4.8 0 APPENDIX A 3 APPENDIX B 1 APPENDIX C 2 APPENDIX D 6 APPENDIX E 4 APPENDIX F 5 TELNET TRACEABILITY INDEX Continued Reference Server Test Number --------- -------------------- 4.2.2 1, 2, 3, 4, 5, 6 4.2.3 1, 2, 3, 4, 5, 6 4.3 0, 11 4.3.1.2 0 4.4.2 7 4.5 7 4.5.1 15 4.6.1.1 11, 12 4.6.1.3.3 17 4.6.1.3.4 16 4.6.1.3.5 8 4.6.1.3.6 9 4.6.1.3.7 10 4.7.1.b 14 4.8 0 APPENDIX A 3 APPENDIX B 1 APPENDIX C 2 APPENDIX D 6 APPENDIX E 4 APPENDIX F 5 USER TELNET TESTS INDEX USER TEST NUMBERS versus USER TELNET Commands/Primitives/Options/Modes The following table shows the TELNET Test Numbers which may be regarded as the "principal tests" of each U8ER TELNET Command or Primitive and/or Option or Mode. Test Numbers not indicated here may be used to establish necessary predecessor conditions for these tests. Although the Test Numbers in the USER scenarios replicate the Test Numbers in the SERVER scenarios a common Test Number does not indicate equivalent, complementary, or corresponding tests. Command or Primitive Option User Test Number -------------------- ------ -------------------- Open connection 0 Network Virtual Terminal Go Ahead status 0 Network Virtual Terminal Echo status 0 Response to DO option request Remote echo 1 GoAhead 2 Binary 3 Timing Mark 4 Extended Options 5 Status 6 Response to DO option request for enabled option Remote echo 1 GoAhead 2 Binary 3 Timing Mark 4 Extended Options 5 Status 6 Response to DON'T option request for disabled option Remote echo 1 GoAhead 2 Binary 3 Timing Mark 4 Extended Options 5 Status 6 Response to WILL option request for enabled option Remote echo 1 GoAhead 2 Binary 3 Timing Mark 4 Extended Options 5 Status 6 Response to WONT option--announcement of disabling Remote echo 1 GoAhead 2 Binary 3 Timing Mark 4 Extended Options 5 Status 6 Response to request to enable option peer has enabled Remote echo 1 GoAhead 2 Binary 3 Timing Mark 4 Extended Options 5 Status 6 Correct implementation of enabled option Remote echo 1 GoAhead 2 Binary 3 Status 6 Correct implementation after disabling option Remote echo 1 GoAhead 2 Binary 3 Status 6 Correct implementation of option when both sides enabled GoAhead 2 Binary 3 Status 6 Generation of synch embedding Data Mark (DM) 7 Generation of Are You There command (AYT) 8 Generation of Erase Character command (EC) 9 Generation of Erase Line command (EL) 10 Generation of Abort Output command (AO) 11 Generation of No Operation (NOP) 12 Generation of Break command (BRK) 13 Transmission of ASCII printable characters 14 Transmission and receipt of Newline (CRLF) 15 Transmission and receipt of Carriage Return (CR NULL) 16 Generation of Interrupt Process command (IP) 17 Non-transmission of request for previously refused option Binary 18 Generation of GoAhead command (GA) 19 Non-transmission of subnegotiation for disabled option Status 20 Close connection 21 SERVER TELNET TESTS INDEX TELNET TEST NUMBERS versus SERVER TELNET Responses to each SERVER TELNET Command or Primitive. The following table shows the TELNET Test Numbers which may be regarded as the "principal tests" of each SERVER TELNET Response (or State, etc.) to the indicated SERVER TELNET Commands or Primitives. Test Numbers not indicated here may be used to establish necessary predecessor conditions for these tests. Although the Test Numbers in the USER scenarios replicate the Test Numbers in the SERVER scenarios a common Test Number does not indicate equivalent, complementary, or corresponding tests. Command or Primitive Option Server Test Number -------------------- ------ -------------------- Open connection 0 Network Virtual Terminal go ahead status 0 Network Virtual Terminal echo status 0 Response to DO option request Remote echo 1 GoAhead 2 Binary 3 Timing Mark 4 Extended Options 5 Status 6 Response to DO option request for enabled option Remote echo 1 GoAhead 2 Binary 3 Timing Mark 4 Extended Options 5 Status 6 Response to DON'T option request for disabled option Remote echo 1 GoAhead 2 Binary 3 Timing Mark 4 Extended Options 5 Status 6 Response to WILL option request for enabled option Remote echo 1 GoAhead 2 Binary 3 Timing Mark 4 Extended Options 5 Status 6 Response to WONT option--announcement of disabling Remote echo 1 GoAhead 2 Binary 3 Timing Mark 4 Extended Options 5 Status 6 Response to request to enable option peer has enabled Remote echo 1 GoAhead 2 Binary 3 Timing Mark 4 Extended Options 5 Status 6 Correct implementation of enabled option Remote echo 1 GoAhead 2 Binary 3 Status 6 Correct implementation after disabling option Remote echo 1 GoAhead 2 Binary 3 Status 6 Correct implementation of option when both sides enabled GoAhead 2 Binary 3 Status 6 Response to synch 7 Response to Are You There (AYT) 8 Response to Erase Character (EC) 9 Response to Erase Line (EL) 10 Receipt of ASCII printable characters 11 Transmission and receipt of newline (CRLF) 12 Transmission and receipt of carriage return (CR NULL) 13 Response to No Operation (NOP) 14 Response to Data Mark (DM) with no TCP Urgent 15 Response to Abort Output (AO) 16 Response to Interrupt Process (IP) 17 Close connection 18 TELNET TEST SCENARIOS INDEX TELNET TEST SCENARIO FILES versus TELNET TEST NUMBERS Within the PROTOLAB VAX-11/750 Test Master System, all TELNET test Scenario Files may be found in the following UNIX directory: /usr/users/TSL/test/telnet The following table shows, for each TELNET Test Number, the UNIX filenames of the TELNET test Scenario Files in which it may be regarded as a "principal test objective". A Test Number may be used, to establish necessary predecessor conditions for other Test Numbers, in Scenario Files not indicated here. Although the Test Numbers in the USER scenarios replicate the Test Numbers in the SERVER scenarios a common Test Number does not indicate equivalent, complementary, or corresponding tests. Test Number User Scenario File -------------------- ---------------------------------------- USER_BASIC 0 1 2 3 4 5 6 14 15 16 18 20 21 USER_OPTIONS1 8 9 10 17 19 USER_OPTIONS2 11 13 USER_SYNCH 7 TELNET TEST SCENARIOS INDEX Continued Test Number Server Scenario File -------------------- ---------------------------------------- SERVER_BASIC 0 1 2 3 4 5 6 11 12 13 14 15 18 SERVER_OPTIONS1 8 9 10 17 SERVER_OPTIONS2 16 SERVER_SYNCH 7 TELNET SCENARIOS AND TESTS DESCRIPTIONS Scenario File USER_BASIC Tests Network Virtual Terminal (NVT) characteristics of TELNET implementation. ------------------------------------ Test 0 Open, initial NVT GoAHead and Echo status a. Open - Can a connection be opened? - Action: IUT directed to send an open command. - Verification: Check that message "SERVER TELNET" received from REF server implementation. SUCCESS: Connection opened. FAILURE: Connection not opened. b. NVT GoAhead status - Is the user TELNET waiting for the GoAhead before sending data? - Action: Send a data string from the IUT to the REF peer. - Verification: Check that data not received by REF peer until the REF has sent a GoAhead. SUCCESS: Data sent within 60 seconds of receiving a GoAhead. FAILURE: Data sent without waiting for GoAhead or not sent within 60 seconds of receiving GoAhead- c. NVT echo status - Is the user not remotely echoing? - Action: Send a data string REF to the IUT. - Verification: Check that the data string the REF has issued is not returned back over the network connection to the REF. SUCCESS: Data string not received back by REF. therefore IUT not remotely echoing. FAILURE: Data string received back by REF - IUT remotely echoing. Test 12 NoOperation (NOP) command - Can the user TELNET generate a NOP? - Action: IUT sends a NOP command. - Verification: Check that REF reports that it has received the NOP command. SUCCESS: NOP command received by REF. FAILURE: NOP command not received by REF. Test 14 Correct generation of ASCII printable character set - Can the user TELNET correctly generate the ASCII printable character set? - Action: The IUT sends a string containing all the ASCII printable characters to the REF. - Verification: Check that the REF receives the character string sent by the IUT with all characters correctly transmitted. SUCCESS: REF receives a correctly transmitted character string of all the ASCII printable characters. FAILURE: REF does not correctly receive a character string of all ASCII printable characters. Test 15 Transmission and reception of newline character. - Does the IUT correctly send and receive the Carriage Return Line-Feed <CR LF> combination? - Action: The IUT sends a data string with newline characters embedded. The REF sends a data string with newline characters embedded to the IUT. - Verification: Check that the REF receives the data string with the newlines in the correct places. Check that the IUT receives the data string with the newlines in the correct places. SUCCESS: The IUT user TELNET correctly sends the <CR LF> combination for newline and correctly interprets <CR LF> as newline when it is received. FAILURE: The IUT does not correctly send and/or interpret the newline character. Test 16 Transmission and reception of Carriage Return - Does the IUT correctly transmit a Carriage Return as <CR NULL> and interpret <CR NULL> as Carriage Return when it is received? - Action: IUT sends a data string with a carriage return embedded in it. The REF sends a data string with a carriage return embedded in it. - Verification: Check that the REF reports that it has received a <CR NULL> from the IUT. Check that the IUT has received a data string from the REF contains a carriage return. SUCCESS: The IUT correctly transmits a <CR NULL> for a carriage return and can correctly interpret a <CR NULL> as a carriage return. FAILURE: The IUT does not correctly transmit <CR NULL> for carriage return and/or interpret <CR NULL> as carriage return. Test 1 Negotiation and Implementation of Remote Echo option - Does the IUT user TELNET correctly respond to negotiation requests and denials? Does the IUT correctly enable the remote echo option it has agreed to enable? Does the IUT correctly disable the remote echo option when negotiated? - Action: REF initiates negotiation sequence and takes the IUT through the states of responding to the request to do the the option, responding to a request for an option when it is already enabled, responding to a request to disable the option, responding to a peer's announcement that it wishes to do an option, and the peer's refusal to do the option. If the IUT agrees to enable the remote echo, the REF sends a data string to the IUT to determine if the string is remotely echoed back. When the option is disabled, the REF sends a data string to the IUT to determine whether the IUT is still remotely echoing. - Verification: Check the option replies reported as received by the REF for correctness. If testing correct implementation of the remote echo, check if the REF has received back the transmitted data string. SUCCESS: The IUT correctly responds to the negotiation sequences. The IUT correctly enables and disables the remote echo. The data string is received by the REF when the IUT is in remote echo mode; it is not received when the option is disabled. FAILURE: The IUT does not correctly respond to the negotiation sequences and/or the IUT does not correctly enable and disable the Remote Echo option. Test 2 Negotiation and Implementation of Suppress GoAhead option - Does the IUT user TELNET correctly respond to negotiation requests and denials? Does the IUT correctly enable the GoAhead option it has agreed to enable? Does the IUT correctly disable the GoAhead option when negotiated? - Action: REF initiates negotiation sequence and takes the IUT through the states of responding to a request to do the option, responding to a request for the option when it is already enabled, responding to a command to disable the option, responding to its peer's announcement that is wishes to enable the option, and responding to the peer's command to disable the option. If the IUT agrees to enable the Suppress GoAhead option, the IUT sends a data string to the REF; no GoAheads are being generated by the server REF. When the option is disabled, the REF is inhibited from sending GoAheads and the IUT attempts to send a data string to the REF. - Verification: Check the IUT option replies reported by the REF for correctness. If testing correct implementation of the Suppress GoAhead, check if the REF has received the transmitted data string although no GoAheads are being generated. If the option is disabled, check if the IUT waited for the GoAhead to send data and if the data string was sent within 60 seconds of receiving the GoAhead. SUCCESS: The IUT correctly responds to the negotiation sequences. The IUT correctly enables and disables the Suppress GoAhead option. FAILURE: The IUT does not correctly respond to the negotiation sequences and/or the IUT does not correctly enable and disable the Suppress GoAhead option. Test 3 Negotiation and Implementation of Binary option - Does the IUT user TELNET correctly respond to negotiation requests and denials? Does the IUT correctly enable the Binary option it has agreed to enable? Does the IUT correctly disable the Binary option when negotiated? - Action: REF initiates negotiation sequence and takes the IUT through the states of responding to a request to do the option, responding to a request for the option when it is already enabled, responding to a command to disable the option, responding to its peer's announcement that is wishes to enable the option, and responding to the peer's command to disable the option. If the IUT agrees to enable the Binary option, the IUT sends a data string of non-printable ASCII characters , including one TELNET IAC(377), to the REF; When the option is disabled, the IUT sends the same data string to the IUT. When the IUT has agreed that the REF can transmit in binary, a data string containing ASCII unprintable characters is sent from the REF to the IUT. - Verification: Check the IUT option replies reported by the REF for correctness. When testing implementation of the enabled Binary option, check if the REF has reported receiving two IACs from the IUT. When the option has been disabled, check the REF to determine that two IACs have not been transmitted. When the IUT has agreed that the REF may transmit Binary, check that the transmitted data string was correctly interpreted by the IUT. SUCCESS: The IUT correctly responds to the negotiation sequences. The IUT correctly enables and disables the Binary option. FAILURE: The IUT does not correctly respond to the negotiation sequences and/or the IUT does not correctly enable and disable the Binary option. Test 4 Negotiation of Timing Mark option - Does the IUT user TELNET correctly respond to negotiation requests and denials? - Action: REF initiates negotiation sequence and takes the IUT through the states of responding to a request to do the option, responding to a request for the option when it is already enabled, responding to a command to disable the option, responding to its peer's announcement that is wishes to enable the option, and responding to the peer's command to disable the option. - Verification: Check the IUT option replies reported by the REF for correctness. SUCCESS: The IUT correctly responds to the negotiation sequences. FAILURE: The IUT does not correctly respond to the negotiation sequences. Test 5 Negotiation of Extend Option List option - Does the IUT user TELNET correctly respond to negotiation requests and denials? - Action: REF initiates negotiation sequence and takes the IUT through the states of responding to a request to do the option, responding to a request for the option when it is already enabled, responding to a command to disable the option, responding to its peer's announcement that is wishes to enable the option, and responding to the peer's command to disable the option. - Verification: Check the IUT option replies reported by the REF for correctness. SUCCESS: The IUT correctly responds to the negotiation sequences. FAILURE: The IUT does not correctly respond to the negotiation sequences. Test 6 Negotiation and Implementation of Status option - Does the IUT user TELNET correctly respond to negotiation requests and denials? Does the IUT correctly enable the Status option it has agreed to enable? Does the IUT correctly disable the Status option when negotiated? - Action: REF initiates negotiation sequence and takes the IUT through the states of responding to a request to do the option, responding to a request for the option when it is already enabled, responding to a command to disable the option, responding to its peer's announcement that is wishes to enable the option, and responding to the peer's command to disable the option. If the IUT agrees to enable the Status option, the REF sends the subnegotiation command Status Send to the IUT. - Verification: Check the IUT option replies reported by the REF for correctness. When testing implementation of the enabled Status option, check if the REF has reported receiving a Status is subnegotiation reply from the IUT correctly listing the status of the negotiated options. SUCCESS: The IUT correctly responds to the negotiation sequences. The IUT correctly enables the Status option. FAILURE: The IUT does not correctly respond to the negotiation sequences and/or the IUT does not correctly enable the Status option. Test 18 Non transmission of request for a refused option until a new connection has been made or the status of another option changed. - Does the IUT user TELNET correctly not send a request for a previously refused option? - Action: REF is placed in a state where it refuses all options. The IUT requests the REF to Do Binary and is refused. The IUT is directed to again request the option. - Verification: Check to see if the REF reports having received the second option request. SUCCESS: The IUT correctly did not send the second option request to the REF. FAILURE: The IUT sends the second option request to the REF. Test 20 Subnegotiation command not sent for an unnegotiated option - Does the IUT user TELNET correctly not send a subnegotiation request for an unnegotiated option? - Action: Status option is not enabled. IUT is directed to send the subnegotiation command Status Send to the REF. - Verification: Check to see if the REF reports having received the subnegotiation request. SUCCESS: The IUT correctly did not send the subnegotiation request to the REF. FAILURE: The IUT sends the subnegotiation request to the REF. Test 21 Close the Telnet Connection (Not an explicit part of MIL STD 1782) - Can the IUT user TELNET close the Telnet connection? - Action: The IUT is directed to close the connection. - Verification: Check to see if the REF reports having received the Close. SUCCESS: The IUT correctly closes the Telnet connection. FAILURE: The REF never receives a Close from the IUT. TELNET SCENARIOS AND TESTS DESCRIPTIONS Scenario File USER_OPTIONS1 Tests commonly implemented optional TELNET commands: Are You There; Erase Character; Erase Line; Go Ahead; and Interrupt Process. ------------------------------------ Test 8 Are You There (AYT) command - Can the user TELNET generate an AYT? - Action: IUT sends a AYT command. - Verification: Check that REF reports that it has received the AYT command. SUCCESS: AYT command received by REF. FAILURE: AYT command not received by REF. Test 9 Erase Character (EC) command - Can the user TELNET generate an EC? - Action: IUT sends a EC command. - Verification: Check that REF reports that it has received the EC command. SUCCESS: EC command received by REF. FAILURE: EC command not received by REF. Test 10 Erase Line (EL) command - Can the user TELNET generate an EL? - Action: IUT sends a EL command. - Verification: Check that REF reports that it has received the EL command. SUCCESS: EL command received by REF. FAILURE: EL command not received by REF. Test 19 GoAhead (GA) command - Can the user TELNET generate a GA? - Action: IUT sends a GA command. - Verification: Check that REF reports that it has received the GA command. SUCCESS: GA command received by REF. FAILURE: GA command not received by REF. Test 20 Interrupt Process (IP) command - Can the user TELNET generate an IP? - Action: IUT sends a IP command. - Verification: Check that REF reports that it has received the IP command. SUCCESS: IP command received by REF. FAILURE: IP command not received by REF. TELNET SCENARIOS AND TESTS DESCRIPTIONS Scenario File USER_OPTIONS2 Tests less commonly implemented optional TELNET commands: Break and Abort Output. ------------------------------------ Test 13 Break (BRK) command - Can the user TELNET generate a BRK? - Action: IUT sends a BRK command. - Verification: Check that REF reports that it has received the BRK command. SUCCESS: BRK command received by REF. FAILURE: BRK command not received by REF. Test 11 Abort Output (AO) command - Can the user TELNET generate an AO? - Action: IUT sends an AO command. - Verification: Check that REF reports that it has received the AO command. SUCCESS: AO command received by REF. FAILURE: AO command not received by REF. TELNET SCENARIOS AND TESTS DESCRIPTIONS Scenario File USER_SYNCH Tests less commonly implemented optional TELNET command: Synch. ------------------------------------ Test 7 Synch command (TCP urgent with Data Mark (DM) embedded in data stream). - Can the user TELNET generate a Synch? - Action: IUT sends a Synch command embedded in a data string. - Verification: Check that REF reports that it has received the TCP Urgent and the DM. Check that the DM is placed in the proper position in the data stream. SUCCESS: The TCP Urgent and the correctly placed DM received by REF. FAILURE: The TCP Urgent and/or the correctly placed DM not received by REF. TELNET SCENARIOS AND TESTS DESCRIPTIONS Scenario File SERVER_BASIC Tests Network Virtual Terminal (NVT) characteristics of TELNET implementation. ------------------------------------ test 0 Open, initial NVT GoAHead and Echo status a. Open - Can a connection be opened? - Action: REF sends an open command. - Verification: Check that message "login" received from REF user implementation. SUCCESS: Connection opened. FAILURE: Connection not opened. b. NVT GoAhead status - Is the server TELNET generating the GoAhead? - Action: Opening the connection should result in the server Telnet sending a GoAhead to user Telnet. - Verification: Check that the REF reports having received a GoAhead. SUCCESS: A GoAhead generated by the IUT. FAILURE: IUT not generating GoAhead. c. NVT echo status - Is the IUT server remotely echoing? - Action: Send a data string from the REF to the IUT. - Verification: Check that the data string the REF has issued is not returned back over the network connection to the REF. SUCCESS: Data string not received back by REF therefore IUT not remotely echoing. FAILURE: Data string received back by REF - IUT remotely echoing. Test 11 Correct interpretation of ASCII printable character set - Can the server TELNET correctly interpret the ASCII printable character set? - Action: The REF sends a string containing all the ASCII printable characters to the IUT. - Verification: Check that the IUT returns to the Central Driver the same data string sent by the REF. SUCCESS: IUT correctly interprets the character string of all the ASCII printable characters. FAILURE: IUT does not correctly interpret a character string of all ASCII printable characters. Test 12 Transmission of newline character. - Does the IUT correctly send the Carriage-Return Line-Feed <CR LF> combination? - Action: The IUT is directed to send a data string with newline characters embedded. - Verification: Check that the REF receives the data string with the newlines in the correct places and specified with a <CR><LF>(octal 15 followed by octal 12) SUCCESS: The IUT user TELNET correctly sends the <CR LF> combination for newline. FAILURE: The IUT does not correctly send newline character. Test 13 Transmission and reception of Carriage Return - Does the IUT correctly transmit a Carriage Return as <CR NULL> and interpret <CR NULL> as Carriage Return when it is received? - Action: IUT sends a data string with a carriage return embedded in it. The REF sends a data string with a carriage return embedded in it. - Verification: Check that the REF has received a data string from the IUT containing a <CR> (an octal 15). Check that the IUT has received a data string from the REF containing a carriage return. SUCCESS: The IUT correctly transmits a <CR NULL> for a carriage return and can correctly interpret a <CR NULL> as a carriage return. FAILURE: The IUT does not correctly transmit <CR NULL> for carriage return and/or interpret <CR NULL> as carriage return. Test 14 NoOperation (NOP) command - Can the server TELNET correctly handle a NOP in the data stream? - Action: REF sends a NOP command embedded in a data string to the IUT . - Verification: Check that IUT returns to the Central Driver the data string with the NOP removed and having had no effect on the data string. SUCCESS: NOP command correctly handled by IUT. FAILURE: NOP command not correctly handled by the IUT. Test 15 Data Mark (DM) command with no corresponding TCP Urgent. - Can the server TELNET correctly handle a DM in the data stream? - Action: REF sends a DM command embedded in a data string to the IUT. No TCP Urgent is sent. - Verification: Check that IUT returns to the Central Driver the data string with the DM removed and having had no effect on the data string. SUCCESS: Unaccompanied DM command correctly handled by IUT.n FAILURE: Unaccompanied DM command not correctly handled by the IUT. Test 1 Negotiation and Implementation of Remote Echo option - Does the IUT server TELNET correctly respond to negotiation requests and denials? Does the IUT correctly enable the remote echo option it has agreed to enable? Does the IUT correctly disable the remote echo option when negotiated? - Action: REF initiates negotiation sequence and takes the IUT through the states of responding to the request to do the the option, responding to a request for an option when it is already enabled, responding to a request to disable the option, responding to a peer's announcement that it wishes to do an option, and the peer's refusal to do the option. If the IUT agrees to enable the remote echo, the REF sends a data string to the IUT to determine if the string is remotely echoed back. When the option is disabled, the REF sends a data string to the IUT to determine whether the IUT is still remotely echoing. - Verification: Check the option replies reported as received by the REF for correctness. If testing correct implementation of the remote echo, check if the REF has received back the transmitted data string. SUCCESS: The IUT correctly responds to the negotiation sequences. The IUT correctly enables and disables the remote echo. The data string is received by the REF when the IUT is in remote echo mode; it is not received when the option is disabled. FAILURE: The IUT does not correctly respond to the negotiation sequences and/or the IUT does not correctly enable and disable the Remote Echo option. Test 2 Negotiation and Implementation of Suppress GoAhead option - Does the IUT server TELNET correctly respond to negotiation requests and denials? Does the IUT correctly enable the GoAhead option it has agreed to enable? Does the IUT correctly disable the GoAhead option when negotiated? - Action: REF initiates negotiation sequence and takes the IUT through the states of responding to a request to do the option, responding to a request for the option when it is already enabled, responding to a command to disable the option, responding to its peer's announcement that is wishes to enable the option, and responding to the peer's command to disable the option. If the IUT agrees to enable the Suppress GoAhead option, the IUT sends a data string to the REF; no GoAheads are being generated by the server REF. When the option is disabled, the REF is inhibited from sending GoAheads and the IUT attempts to send a data string to the REF. - Verification: Check the IUT option replies reported by the REF for correctness. If testing correct implementation of the Suppress GoAhead, check if the REF has received the transmitted data string although no GoAheads are being generated. If the option is disabled, check if the IUT waited for the GoAhead to send data and if the data string was sent within 60 seconds of receiving the GoAhead. SUCCESS: The IUT correctly responds to the negotiation sequences. The IUT correctly enables and disables the Suppress GoAhead option. FAILURE: The IUT does not correctly respond to the negotiation sequences and/or the IUT does not correctly enable and disable the Suppress GoAhead option. Test 3 Negotiation and Implementation of Binary option - Does the IUT server TELNET correctly respond to negotiation requests and denials? Does the IUT correctly enable the Binary option it has agreed to enable? Does the IUT correctly disable the Binary option when negotiated? - Action: REF initiates negotiation sequence and takes the IUT through the states of responding to a request to do the option, responding to a request for the option when it is already enabled, responding to a command to disable the option, responding to its peer's announcement that is wishes to enable the option, and responding to the peer's command to disable the option. If the IUT agrees to enable the Binary option, the IUT sends a data string of non-printable ASCII characters , including one TELNET IAC(377), to the REF; When the option is disabled, the IUT sends the same data string to the IUT. When the IUT has agreed that the REF can transmit in binary, a data string containing ASCII unprintable characters is sent from the REF to the IUT. - Verification: Check the IUT option replies reported by the REF for correctness. When testing implementation of the enabled Binary option, check if the REF has reported receiving two IACs from the IUT. When the option has been disabled, check the REF to determine that two IACs have not been transmitted. When the IUT has agreed that the REF may transmit Binary, check that the transmitted data string was correctly interpreted by the IUT. SUCCESS: The IUT correctly responds to the negotiation sequences. The IUT correctly enables and disables the Binary option. FAILURE: The IUT does not correctly respond to the negotiation sequences and/or the IUT does not correctly enable and disable the Binary option. Test 4 Negotiation of Timing Mark option - Does the IUT server TELNET correctly respond to negotiation requests and denials? - Action: REF initiates negotiation sequence and takes the IUT through the states of responding to a request to do the option, responding to a request for the option when it is already enabled, responding to a command to disable the option, responding to its peer's announcement that is wishes to enable the option, and responding to the peer's command to disable the option. - Verification: Check the IUT option replies reported by the REF for correctness. SUCCESS: The IUT correctly responds to the negotiation sequences. FAILURE: The IUT does not correctly respond to the negotiation sequences. Test 5 Negotiation of Extend Option List option - Does the IUT server TELNET correctly respond to negotiation requests and denials? - Action: REF initiates negotiation sequence and takes the IUT through the states of responding to a request to do the option, responding to a request for the option when it is already enabled, responding to a command to disable the option, responding to its peer's announcement that is wishes to enable the option, and responding to the peer's command to disable the option. - Verification: Check the IUT option replies reported by the REF for correctness. SUCCESS: The IUT correctly responds to the negotiation sequences. FAILURE: The IUT does not correctly respond to the negotiation sequences. Test 6 Negotiation and Implementation of Status option - Does the IUT server TELNET correctly respond to negotiation requests and denials? Does the IUT correctly enable the Status option it has agreed to enable? Does the IUT correctly disable the Status option when negotiated? - Action: REF initiates negotiation sequence and takes the IUT through the states of responding to a request to do the option, responding to a request for the option when it is already enabled, responding to a command to disable the option, responding to its peer's announcement that is wishes to enable the option, and responding to the peer's command to disable the option. If the IUT agrees to enable the Status option, the REF sends the subnegotiation command Status Send to the IUT. - Verification: Check the IUT option replies reported by the REF for correctness. When testing implementation of the enabled STATUS, check if the REF has reported receiving a Status is subnegotiation reply from the IUT correctly listing the status of the negotiated options. SUCCESS: The IUT correctly responds to the negotiation sequences. The IUT correctly enables the Status option. FAILURE: The IUT does not correctly respond to the negotiation sequences and/or the IUT does not correctly enable the Status option. Test 18 Close the Telnet Connection (Not an explicit part of MIL STD 1782) - Does the IUT server TELNET respond correctly when the user TELNET closes the connection. - Action: The REF sends a command to close the connection. - Verification: Check to see if the REF reports the connection closed. SUCCESS: The IUT correctly responds to a close of the Telnet connection. FAILURE: The IUT does not correctly respond to a close. TELNET SCENARIOS AND TESTS DESCRIPTIONS Scenario File SERVER_OPTIONS1 Tests commonly implemented optional TELNET commands: Are You There; Erase Character; Erase Line; GoAhead; and Interrupt Process. Test 8 Are You There (AYT) command - Can the server TELNET correctly respond to an AYT? - Action: REF sends an AYT command. - Verification: Check that REF reports that it has received a visible response from the IUT. SUCCESS: Receipt of AYT command causes IUT to respond with a visible response. FAILURE: No visible response returned by IUT after receiving an AYT command. Test 9 Erase Character (EC) command - Can the server TELNET correctly respond to an EC? - Action: REF sends a EC command embedded in a data string. - Verification: Check that IUT sends to the Central Driver the data string with the character immediately preceding the EC deleted. SUCCESS: IUT correctly handles EC command by deleting immediately preceding character. FAILURE: IUT does not correctly handle EC command - the character immediately preceding the EC is not deleted. Test 10 Erase Line (EL) command - Can the user TELNET correctly respond to an EL? - Action: REF sends a EL command embedded in a string string containing three lines.. - Verification: Check that IUT returns to the Central Driver the received data string with the line immediately preceding the EL command deleted. SUCCESS: IUT correctly handles EL by deleting immediately preceding line. FAILURE: IUT does not correctly handled EL -- the correct line was not deleted. Test 17 Interrupt Process (IP) command - Can the server TELNET correctly respond to an IP? - Action: REF sends a IP command. - Verification: Check that REF reports that it has received the IUT cursor indicating that the process being run has been interrupted. (The process being run on the IUT was the server Remote Driver.) SUCCESS: IUT correctly responds to IP by interrupting its running process. FAILURE: IUT does not correctly respond to IP command. TELNET SCENARIOS AND TESTS DESCRIPTIONS Scenario File SERVER_OPTIONS2 Tests optional TELNET command: Abort Output. ------------------------------------ Test 11 Abort Output (AO) command - Does the server TELNET respond correctly to AO? - Action: REF sends an AO command. - Verification: Check that REF reports that it has received a Synch. Then the IUT is directed to send a data string and the REF checked to see if the data string is received. It should not be received. SUCCESS: The IUT responds to an AO by sending the REF a Synch and not sending any further output data across the TELNET connection. FAILURE: The IUT either does not respond to an AO with a Synch and/or continues to send output data to the peer protocol. TELNET SCENARIOS AND TESTS DESCRIPTIONS Scenario File SERVER_SYNCH Tests optional TELNET command: Synch. ------------------------------------ Test 7 Synch command (TCP urgent with Data Mark (DM) embedded in data stream). - Does the server TELNET correctly respond to a Synch? - Action: REF sends a series of Synch commands embedded in a very long data string. - Verification: Check the data string returned to the Central Driver by the IUT to determine if any data immediately preceding a Synch has been lost. The loss of this data indicates that the IUT has responded correctly to the Synch. However, if no data is lost the IUT may also have handled the Synch correctly. SUCCESS: Data immediately preceding a Synch was lost or no data was lost indicates successful handling of the Synch by the IUT. FAILURE: If data transmitted after the last Synch was lost this indicates that the Synch is not being correctly handled by the IUT.